Hi everyone this is my first post and I'm in need of help.
I've been reading on this forum but can't find the answer.
First I had no gear selection at all so I checked the oil in gearbox actuator and it was below minimal so topped up and still no luck. Then I read clean the connectors on top of the ECU and this is where it went wrong I think I cleaned the 2 circular sensors that are side which are held in with star allen key bolts which had little oil in them. When I connected it all back the car wouldn't start now then some how I got it started and car was moving forward with the handbrake on and then it turned itself off and now it won't start again.
Any help here would be grateful. This is really doing me in now.
Thanks.
I've been reading on this forum but can't find the answer.
First I had no gear selection at all so I checked the oil in gearbox actuator and it was below minimal so topped up and still no luck. Then I read clean the connectors on top of the ECU and this is where it went wrong I think I cleaned the 2 circular sensors that are side which are held in with star allen key bolts which had little oil in them. When I connected it all back the car wouldn't start now then some how I got it started and car was moving forward with the handbrake on and then it turned itself off and now it won't start again.
Any help here would be grateful. This is really doing me in now.
Thanks.